• Nabber Mini autonomous mouse trap — front angled view
  • Nabber Mini rodenticide-free mouse trap — front view
  • Nabber Mini autonomous mouse trap — rear view showing open panels
  • Nabber Mini mouse trap deployed in attic environment
1 4

Nabber Systems Inc

Nabber Mini

Nabber Mini

A compact, fully autonomous rodent control unit designed for smaller target species and tighter installation environments. Nabber Mini delivers the same humane, rodenticide-free, self-resetting operation as larger Nabber systems, in a smaller and lighter package built for spaces where size matters.

Nabber Mini uses patented cervical dislocation technology to deliver instant, humane euthanasia without chemicals, snap traps, or glue boards. Once armed, it monitors passively and operates autonomously — no routine checks, no bait replenishment, no manual resets required between service visits. A simple LED indicator shifts from green to blue when the unit has activated, so you always know the status at a glance.

Each unit handles up to 12 activations per service cycle and runs for up to six months on a single battery set. Works with any attractant — no proprietary consumables, no vendor lock-in. Carcasses are contained in a sealed internal compartment, removing toxic remains from your environment immediately upon activation.

Fully compliant with rodenticide-free and organic certification requirements. Patented in 10+ countries. Designed and manufactured in Canada.

Best For: Mice and voles, tight spaces, and installations where size and weight are key considerations — suspended ceilings, confined service voids, pallet stacks, attics, crawlspaces, and food production environments.

Pricing: $99 USD / $139 CAD per unit. Commercial and volume pricing available — contact us directly.

View full details

Product Details

Instructions

WARNING: Keep hands clear of the impact area at all times. Keep the unit away from pets and children. Always power off the unit before handling, servicing or transporting it.

Setup

  1. Open the battery hatch. Install the provided or replacement 4xAA batteries (Note: lithium batteries provide 2X the service life). Close and secure the battery hatch.
  2. Open the attractant hatch. Add an attractant of choice to the bait chamber. Close and secure the attractant hatch.

Placement

  1. Place the unit where rodent activity has been observed.
  2. Ideal locations include along wall edges, service voids, above suspended ceilings, storage rooms, under decks, and tight spaces.
  3. Keep the unit away from direct moisture, sunlight or excessive debris.

Operation

  1. Once in place, turn the unit on. The system will activate once and reset itself.
  2. The LED will flash GREEN approximately once per minute to indicate that the system is armed and ready.
  3. The unit remains in this passive monitoring mode until it detects a rodent, at which time it activates and instantly and humanely euthanizes it.
  4. The carcass chambre secures the carcass for later removal.
  5. The unit automatically resets itself within approximately one minute, ready for the next event.
  6. The LED will now flash BLUE to indicate that it has been activated and that there is a carcass in the chambre.

Maintenance

  1. Periodically inspect and empty the carcass chamber. Always turn off the power before handling the unit.
  2. The LED will flash RED when the batteries are low. Replace them only with 4xAA batteries (lithium for maximum effectiveness).
  3. Clean the unit periodically with mild soap and water. Always turn off the power before handling or washing the unit.

Technical Specifications

Target Species

  • Mice
  • Voles

Power

  • Battery powered 4xAA - alkaline or lithium (recommended)
  • User-replaced batteries
  • Designed for 3-6 months of field life between battery service intervals (w/lithium)

Operation

  • Fully autonomous operation once activated
  • Self-resetting after each activation
  • No rodenticides or poisons

Servicing and Disposal

  • No direct contact with rodents required
  • Enclosed storage chambre allows for hygienic disposal
  • Designed to be emptied and returned to service quickly
  • Compatible with standard electronics waste handling practices (subject to local regulations)

Environment

  • Indoor and sheltered use
  • Suitable for tight and confined spaces

Physical

  • Compact, lightweight form factor
  • Dimensions: 15cm wide X 15cm long X 10cm high
  • Weight: 0.75 kg

Safety

  • Rodenticide-free
  • Enclosed impact mechanism
  • Designed to minimize non-target access


Nabber products include a one-year limited manufacturer’s warranty covering defects in materials and workmanship under normal use.