1 2

Nabber Systems Inc

Nabber Multi

Nabber Multi

A robust, fully autonomous rodent control unit designed for a broader range of invasive small mammal species and more demanding environments. Nabber Multi delivers the same humane, rodenticide-free, self-resetting operation as the Nabber Mini, scaled up for increased versatility and coverage.

Built as the system’s workhorse, Nabber Multi is suited for situations where target species may vary, infestation patterns are unclear, or continuous monitoring is required before problems become visible.

The Nabber Multi is priced at $179 USD per unit. Commercial and volume pricing is available, contact us directly at the link below.


Best For: Rats, squirrels, mice, voles and other small mammals; mixed or unknown infestations; perimeter and sentinel deployments; locations requiring a single, always-on control solution.

View full details

Product Details

Instructions

Setup

  1. Open the battery hatch. Install the provided or replacement 4xAA batteries (Note: lithium batteries provide 2X the service life). Close and secure the battery hatch.
  2. Open the attractant hatch. Add an attractant of choice to the bait chamber. Close and secure the attractant hatch.

Placement

  1. Place the unit where rodent activity has been observed.
  2. Ideal locations include along wall edges, service voids, above suspended ceilings, storage rooms, under decks, and tight spaces.
  3. Keep the unit away from direct moisture, sunlight or excessive debris.

Operation

  1. Once in place, turn the unit on. The system will activate once and reset itself.
  2. The LED will flash GREEN approximately once per minute to indicate that the system is armed and ready.
  3. The unit remains in this passive monitoring mode until it detects a rodent, at which time it activates and instantly and humanely euthanizes it.
  4. The carcass chambre secures the carcass for later removal.
  5. The unit automatically resets itself within approximately one minute, ready for the next event.
  6. The LED will now flash BLUE to indicate that it has been activated and that there is a carcass in the chambre.

Maintenance

  1. Periodically inspect and empty the carcass chamber. Always turn off the power before handling the unit.
  2. The LED will flash RED when the batteries are low. Replace them only with 4xAA batteries (lithium for maximum effectiveness).
  3. Clean the unit periodically with mild soap and water. Always turn off the power before handling or washing the unit.

Technical Specifications

Target Species

  • Rats
  • Mice

Power

  • Battery powered 8xAA - alkaline or lithium (recommended)
  • User-replaced batteries
  • Designed for 3-6 months of field life between battery service intervals (w/lithium)

Operation

  • Fully autonomous operation once activated
  • Self-resetting after each activation
  • No rodenticides or poisons

Servicing and Disposal

  • No direct contact with rodents required
  • Enclosed storage chambre allows for hygenic disposal
  • Designed to be emptied and returned to service quickly
  • Compatible with standard electronics waste handling practices (subject to local regulations)

Environment

  • Indoor and sheltered use
  • Suitable for tight and confined spaces

Physical

  • Compact, lightweight form factor
  • Dimensions: 25cm wide X 25cm long X 15cm high
  • Weight: 1.25 kg

Safety

  • Rodenticide-free
  • Enclosed impact mechanism
  • Designed to minimize non-target access


Nabber products include a one-year limited manufacturer’s warranty covering defects in materials and workmanship under normal use.