Instructions | Mini

WARNING: Keep hands clear of the impact area at all times. Keep the unit away from pets and children. Always power off the unit before handling, servicing or transporting it.

Setup

  1. Open the battery hatch. Install the provided or replacement 6xAA batteries (Note: lithium batteries provide 2X the service life). Close and secure the battery hatch.
  2. Open the attractant hatch. Add an attractant of choice to the bait chamber. Close and secure the attractant hatch.

Placement

  1. Place the unit where rodent activity has been observed.
  2. Ideal locations include along wall edges, service voids, above suspended ceilings, storage rooms, under decks, and tight spaces.
  3. Keep the unit away from direct moisture, sunlight or excessive debris.

Operation

  1. Once in place, turn the unit on. The system will activate once and reset itself.
  2. The LED will flash GREEN to indicate that the system is armed and ready.
  3. The unit remains in this passive monitoring mode until it detects a rodent, at which time it activates and instantly and humanely euthanizes it.
  4. The carcass chambre secures the carcass for later removal.
  5. The unit automatically resets itself within approximately one minute, ready for the next event.
  6. The LED will now flash BLUE to indicate that it has been activated and that there is a carcass in storage.

Maintenance

  1. Periodically inspect and empty the carcass chamber. Always turn off the power before handling the unit.
  2. The LED will flash RED when the batteries are low. Replace them only with 6xAA batteries (lithium for maximum effectiveness).
  3. Clean the unit periodically with mild soap and water. Always turn off the power before handling or washing the unit.